Experimental Television Center Buffer Memory Schematics
- Author
- Richard Brewster
- Publisher
- Experimental Television Center
- Place
- Binghamton, New York
- Type
- Schematics
- ETC archive
- ETC2431
Cite this record
Richard Brewster. Experimental Television Center Buffer Memory Schematics. Experimental Television Center. 1977.
Download RIS citationSubmit a change or correction
Last modified 22 June 2011
Related records
- ETC 1972-73 Tools
While working for the Experimental Television Center the author and David built the first four Jones Frame Buffers; the pictured unit is the author's and may be the only one remaining in the original card rack after David rewired most into newer, larger boxes. The unit adds second-level control and 2v differential video inputs and output with a plexiglass panel; it was initially controlled by a Sinclair ZX81 with programs saved to audio tape and later adapted for control from an Amiga 1000. The buffer includes an internal keyer, four memory boards providing 64 frames and a pseudo-color option; Amiga Basic routines were compiled to C but required unbuilt libraries for blank switching, producing noisy routines.
- Experimental Television Center: Studio Manual Rewrites Bibliography
Experimental Television Center: Studio Manual Rewrites. Outline of Manual, First Two Sections: I. Main Structure of the System (Introduction, Sync, Video Routing, Output Amplifier, Monitoring the Signal, and Set-Up) and II. Video Processing Devices (Introduction, Voltage Controlled Amplifiers, Mixer…
- Jones Frame Buffer in Experimental Television Center Studio System Manual Tools
The Jones Buffer is a black-and-white image buffer that operates standalone or under Z-80 computer control; front-panel controls allow real-time digitization, single-page grab/store and a keyer-like selective storage between live and stored signals. Memory totals 128,000 bytes (256×256 resolution yields 16 pages) and the buffer outputs a digital signal converted to analog; video I/O is routed via a matrix with two inputs (video and clip) and one output. In stand-alone mode it supports software such as STROBE64 and TESPNEW and can be routed with the CAT buffer; in computer mode it requires buffer-specific programs (e.g., NEWGRAB) and occupies the Z80 and D+7A, preventing CAT use.
- Experimental Television Center: Imaging System Manual - The Digital Imaging System Bibliography
The Experimental Television Center's digital system: Z-80 8 bit microprocessor, 7 channels of digital to analog and analog to digital conversion, with dual floppy disk storage and paper print-out. CAT 100 Buffer.
- Experimental Television Center S-100 Bus and Interface Bibliography
Experimental Television Center S-100 Bus and Interface: Schematics, Paul Davis Notes (S-100 Bus Control Signals, Interface <> Buffer Memory Signals, Interface Connector Signals, and Data Sheets (SSI DM54/DM74 Connection Diagrams/ Gates and One Shots, MSI DM54/DM7489, L89A: 64-Bit Read/Write Memories…
- Experimental Television Center Information Flow Bibliography
A block diagram of how the Information Flow proceeds on the Experimental Television Center Video Computer Synthesizer system. Black and white block diagram schematically representing the human interface , with processors identified as input, synthesizer, recorder, monitor, audience, environment and …